Contacts
Address
United Kingdom, England, Clevedon, BS216TH, Generation House, Yeo Bank 3, Kenn Road
Director
Manager
Phones of enterprise
management
+44
When placing an order please inform the manager that you've learned the information on Allbiz! Thank you that you buy on Allbiz!
Internet
Site:
About enterprise
Auma Actuators, Ltd.
AUMA has been developing and building electric actuators and valve gearboxes for more than 45 years.
As a family-owned company, we are able to take quick decisions and are closely attached to our products and product quality.
Our well-grounded gained knowledge makes us to one of the world’s leading manufacturers of electric actuators.
In stock
The lever actuators SGF are based on the well-established part-turn actuator SG and therefore have the same characteristics
Design features:
Torque range from 90 Nm to 1,200 Nm Limit and torque seating 3-ph AC and 1-ph AC motors Handwheel for manual operation
Ambient conditions:
High...
Group: Optical drives
In stock
AUMA lever gearboxes are used for motor operation of valves via lever arrangement (e.g. butterfly valve, louvre dampers).
Clockwise rotation at the input shaft results in clockwise movement at the lever.
Design features:
Torque range up to 45,000 Nm Swing angle up to 100° Swing lever with 2 or...
Group: Reducers
In stock
AUMA linear gearboxes perform linear movements, e. g. when operating globe valves, and can be combined with a multi-turn actuator SA ... . In case a lever arrangement is required, the LE linear thrust unit can also be mounted on a base.
Design features:
Thrusts from 3.8 kN to 217 kN Strokes up...
Group: Reducers
In stock
To perfom linear movements, e. g. in case of globe valves, the multi-turn actuator SA ... can be combined with the linear thrust unit LE. In case a lever arrangement has to be operated, the linear thrust unit can be mounted on a base.
Design features:
Thrusts from 4 kN to 217 kN Strokes up to...
Group: Optical drives
In stock
AUMA lever gearboxes are used for motor operation of valves via lever arrangement (e.g. butterfly valve, louvre dampers).
Clockwise rotation at the input shaft results in clockwise movement at the lever.
Design features:
Torque range up to 45,000 Nm Swing angle up to 100° Swing lever with 2 or...
Group: Motor-reducers
In stock
AUMA bevel gearboxes are used for the operation of valves (e.g. gate valves, globe valves).
Type of duty:
Short-time duty S2 - 15 min (Open-close duty)
Intermittent duty S4 - 25 (Modulating duty) They can either be operated in:
- manual operation directly via handwheel
- motor operation...
Group: Transmission
In stock
High pressures in pipelines require multi-turn actuators with high torques.
Torques up to 80,000 Nm can be achieved by combining a multi-turn actuator with a multi-turn gearbox GHT.
Type of duty:
Short-time duty S2 - 15 min (open-close duty) Operation: Motor operation Not self-locking
Design
Group: Motor-reducers
In stock
AUMA spur gearboxes are used for the operation of valves (e.g. gate valves, globe valves).
Type of duty:
Short-time duty S2 - 15 min (Open-close duty)
Intermittent duty S4 - 25 (Modulating duty) They can either be operated in:
- manual operation directly via handwheel
- motor operation...
Group: Transmission